S S Chemicals

SS Chemicals was bought up in the year 2017 as a reputed firm. We are engaged in Manufacturing and Trading a range of Industrial Solvent, Acid Base Chemicals, Basic Chemicals, etc.

SS Chemicals was bought up in the year 2017 as a reputed firm. We are engaged in Manufacturing and Trading a range of Industrial Solvent, Acid Base Chemicals, Basic Chemicals, etc.

SS Chemicals was bought up in the year 2017 as a reputed firm. We are engaged in Manufacturing and Trading a range of Industrial Solvent, Acid Base Chemicals, Basic Chemicals, etc.

SS Chemicals was bought up in the year 2017 as a reputed firm. We are engaged in Manufacturing and Trading a range of Industrial Solvent, Acid Base Chemicals, Basic Chemicals, etc.

We are engaged in offering Sodium Hypochlorite Solution to our clients. Our range of all products is widely appreciated by our clients.

Propylene Glycol (PG) is a colorless, odorless, hygroscopic liquid widely used in pharma, food, cosmetics, and industrial applications.

Basic details

• Chemical formula: C₃H₈O₂

• Appearance: Clear liquid

• Taste: Slightly sweet

• Purity: Typically 99.5% min

Common grades

• Pharma grade (USP / BP / IP)

• Food grade

• Industrial / Technical grade

Major uses

• Pharmaceuticals (syrups, injectables, ointments)

• Food industry (additive E1520)

• Cosmetics & personal care (humectant, solvent)

• Antifreeze & coolants (non-toxic type)

• Resins, paints, and inks

• E-liquids & flavors

Normal Butanol (also called n-Butanol or 1-Butanol) is a colorless, flammable alcohol widely used as a solvent and chemical intermediate.

Basic details

• Chemical formula: C₄H₁₀O

• IUPAC name: 1-Butanol

• Appearance: Clear liquid

• Odor: Mild alcoholic smell

• Purity: Typically 99% min

Major uses

• Solvent for paints, coatings, inks, and resins

• Manufacture of butyl acrylate & butyl acetate

• Plasticizers & adhesives

• Pharmaceutical & chemical intermediates

• Fuel blending (limited use)

Key properties

• Slightly soluble in water

• Boiling point: ~117.7 °C

• Moderate evaporation rate

• Good solvency power

Safety & handling

• Flammable liquid

• Vapors may cause irritation or dizziness

• Use PPE and adequate ventilation

• Store away from heat and ignition sources

Industrial note

• Produced by oxo process or fermentation routes

• Supplied in drums, IBCs, and bulk tankers

If you want:

• IndiaMART product description

• MSDS / safety summary

• Comparison: n-Butanol vs IPA vs Ethanol

• Short buyer-friendly spec

MTO Mineral Turpentine Oil means Made-To-Order Mineral Turpentine Oil, supplied as per buyer-specific specifications rather than a standard grade.

Basic details

• Product: Mineral Turpentine Oil (MTO cut)

• Type: Petroleum distillate solvent

• Appearance: Clear, colorless liquid

• Odor: Characteristic hydrocarbon smell

What “MTO” means here

• Custom boiling range

• Controlled aromatic / paraffinic content

• Specific flash point requirement

• Tailored evaporation rate & odor level

• Produced only after order confirmation

Major uses

• Paints & coatings

• Thinners & cleaners

• Printing inks

• Rubber & adhesive industry

• Metal cleaning

In common usage, salt is a mineral composed primarily of sodium chloride (NaCl). When used in food, especially at table in ground form in dispensers, it is more formally called table salt. In the form of a natural crystalline mineral, salt is also known as rock salt or halite. Salt is essential for life in general, and saltiness is one of the basic human tastes. Salt is one of the oldest and most ubiquitous food seasonings, and is known to uniformly improve the taste perception of food, including otherwise unpalatable food.^[1] Salting, brining, and pickling are also ancient and important methods of food preservation.

2- BUTOXYETHANOL IS AN ORGANIC COMPOUND WITH THA CHEMICALS FORMULA BUOC2H4OH THA COLORLESS LIQIDE HAS A SWEET ETHER LIKE ODER.

SS Chemicals was bought up in the year 2017 as a reputed firm. We are engaged in Manufacturing and Trading a range of Industrial Solvent, Acid Base Chemicals, Basic Chemicals, etc.

SS Chemicals was bought up in the year 2017 as a reputed firm. We are engaged in Manufacturing and Trading a range of Industrial Solvent, Acid Base Chemicals, Basic Chemicals, etc.

Purified water is water that has been mechanically filtered or processed to remove impurities and make it suitable for use. Distilled water was, formerly, the most common form of purified water, but, in recent years, water is more frequently purified by other processes including capacitive deionization, reverse osmosis, carbon filtering, microfiltration, ultrafiltration, ultraviolet oxidation, or electrodeionization

assical distillation, is the process of separating the component substances of a liquid mixture of two or more chemically discrete substances; the separation process is realized by way of the selective boiling of the mixture and the condensation of the vapors in a still.

Distillation can operate over a wide range of pressures from 0.14 bar (e.g., ethylbenzene/styrene) to nearly 21 bar (e.g.,propylene/propane) and is capable of separating feeds with high volumetric flowrates and various components that cover a range of relative volatilities from only 1.17 (o-xylene/m-xylene) to 81.2 (water/ethylene glycol).^[2] Distillation provides a convenient and time-tested solution to separate a diversity of chemicals in a continuous manner with high purity. However, distillation has an enormous environmental footprint, resulting in the consumption of approximately 25% of all industrial energy use.^[3] The key issue is that distillation operates based on phase changes, and this separation mechanism requires vast energy inputs.

Dry distillation (thermolysis and pyrolysis) is the heating of solid materials to produce gases that condense either into fluid products or into solid products. The term dry distillation includes the separation processes of destructive distillation and of chemical cracking, breaking down large hydrocarbon molecules into smaller hydrocarbon molecules. Moreover, a partial distillation results in partial separations of the mixture's components, which process yields nearly-pure components; partial distillation also realizes partial separations of the mixture to increase the concentrations of selected components. In either method, the separation process of distillation exploits the differences in the relative volatility of the component substances of the heated mixture.

In the industrial applications of classical distillation, the term distillation is used as a unit of operation that identifies and denotes a process of physical separation, not a chemical reaction; thus an industrial installation that produces distilled beverages, is a distillery of alcohol. These are some applications of the chemical separation process that is distillation:

• Distilling fermented products to yield alcoholic beverages with a high content by volume of ethyl alcohol.
• Desalination to produce potable water and for medico-industrial applications.
• Crude oil stabilisation, a partial distillation to reduce the vapor pressure of crude oil, which thus is safe to store and to transport, and thereby reduces the volume of atmospheric emissions of volatile hydrocarbons.
• Fractional distillation used in the midstream operations of an oil refinery for producing fuels and chemical raw materials for livestock feed.^[4][5][6]
• Cryogenic Air separation into the component gases — oxygen, nitrogen, and argon — for use as industrial gases.
• Chemical synthesis to separate impurities and un

2 butoxyethanol is an organic compound with tha chemicals formula  buoc2h4oh this colorless liquid  has a sweet ether like oder as it derives from the family of glycol ether and is a it drives  from the ethylene glycoh.

Dichloromethane is an organochloride compound with the formula ch2cl2 this colorless volatile liqued  with a chloroform like sweet odour is widely. Used as a solvent 
athough it is not miscible with water. It is polar and miscible with manyorganic solvent.

SS Chemicals was bought up in the year 2017 as a reputed firm. We are engaged in Manufacturing and Trading a range of Industrial Solvent, Acid Base Chemicals, Basic Chemicals, etc.

We are engaged in offering Non Ferric Alum to our clients. Our range of all products is widely appreciated by our clients.

Ammonia Solution (also known as Aqueous Ammonia or Ammonium Hydroxide) is a clear, alkaline liquid widely used in industrial and commercial applications.

Basic details

• Chemical name: Ammonium Hydroxide

• Chemical formula: NH₄OH (aqueous ammonia)

• Appearance: Clear, colorless liquid

• Odor: Strong, pungent ammonia smell

Common concentrations

• 10%

• 20%

• 25% (most common industrial grade)

Major uses

• Chemical manufacturing

• Fertilizers

• Textile processing

• Rubber industry

• Water treatment

• Cleaning agents

• Pharmaceutical intermediates

In industry, hexanes are used in the formulation of glues for shoes, leather products, and roofing. They are also used to extract cooking oils (such as canola oil or soy oil) from seeds, for cleansing and degreasing a variety of items, and in textile manufacturing. They are commonly used in food based soybean oil extraction in the United States, and are potentially present as contaminants in all soy food products in which the technique is used^{[citation needed]}; the lack of regulation by the FDA of this contaminant is a matter of some controversy.^[9][10]

A typical laboratory use of hexanes is to extract oil and grease contaminants from water and soil for analysis.^[11] Since hexane cannot be easily deprotonated, it is used in the laboratory for reactions that involve very strong bases, such as the preparation of organolithiums. For example, butyllithiums are typically supplied as a hexane solution.^[12]

Hexanes are commonly used in chromatography as a non-polar solvent. Higher alkanes present as impurities in hexanes have similar retention times as the solvent, meaning that fractions containing hexane will also contain these impurities. In preparative chromatography, concentration of a large volume of hexanes can result in a sample that is appreciably contaminated by alkanes. This may result in a solid compound being obtained as an oil and the alkanes may interfere with analysis.

Basic details

• Chemical formula: C₆H₁₂

• Appearance: Colorless, clear liquid

• Odor: Mild, gasoline-like smell

• Purity: Industrial and laboratory grades available

Major uses

• Nylon manufacturing (caprolactam, adipic acid)

• Solvent for resins, paints, and varnishes

• Adhesives & rubber industry

• Chemical intermediate

• Laboratory reagent

Key properties

• Insoluble in water

• Low boiling point: ~80.7 °C

• Non-polar solvent

• High volatility                                                                                                               .

Basic details

• Chemical formula: C₃H₇NO

• IUPAC name: N,N-Dimethylformamide

• Appearance: Colorless liquid with mild amine-like odor

Key properties

• Completely miscible with water and most organic solvents

• High boiling point: ~153 °C

• Excellent solvent for polar and non-polar compounds

• Insoluble in water

• Soluble in organic solvents (alcohol, ether, benzene)

• Boiling point: ~169–170 °C

• Relatively stable under normal conditions

Safety & handling

• Flammable liquid

• Vapors may cause irritation

• Handle with proper ventilation and PPE

• Store away from heat and ignition sources